• An assembly of micro tube of required length and micro tube holding stake.
• Tubing manufactured from virgin polyethylene, with yellow line.
• Resistant to ultra violet (UV) radiation and other environmental effects.
• Snap proof design, tubing is prevented from snapping off even at higher pressures.
• Designed to hold the dripper at a fixed position.
• The flow is dispersed to avoid soil erosion due to jetting.
• Smooth inner surface minimises frictional losses.
• Can be used at low operating pressure.
• Can be supplied in required length of tubing.

• Used as a linear flow dripper in drip systems.
• Recommended to use with low pressure / gravity fed system like drum kit, bucket kit, gravity kit etc.
• Suitable to use for irrigation of bag culture.

* For detailed code, please refer ordering specifications.

Example: MD12 - This code refers to Micro Dripper of inside diameter 1.2 mm and length of tube 100 cm.
Note: Micro Dripper is also available with microtube holding stake. Please specify the code as MTS for separate microtube holding stake.